Mazda CX-7 Roof Rack Installation And Review Videos

Rhino Rack Roof Rack Review - 2012 Mazda CX-7- Video

Today on our 2012 Mazda CX-7 we're doing a test fit of the Rhino-Rack Vortex Aero Crossbars. The part number for our crossbars today is RRVA126B-2. For the foot pack that we're using along with that it's RRRLKVA, and for our fit kit we're using DK220. We already have our front crossbar on and in place. We've got a portion of our back crossbar together, so we're going to show you how to put that last foot pack together, and then how we load it up on our vehicle. We're going to start by taking our foot pack here. I've gone ahead and taken our rubber bottom that comes with our fit kit, and I've fit it on that plastic piece here, that's our foot for the bottom of our foot pack. more

3/8/2016 12:27:27 PM

Rhino Rack Roof Rack Review - 2010 Mazda CX-7- Video

Today on our 2010 Mazda Cx7, we're going to be doing a test fit on the Rhino-Rack Vortex Aero Roof Rack System. We're using the 49-inch crossbars. That part number is RRVA126F-2. That's also available in black. The foot packs themselves, part number RRVALKVA .. RRLKVA, I'm sorry, RRLKVA and the clips and foot pads, DK220. more

12/30/2014 1:48:54 PM

Thule Podium Roof Rack Installation - 2012 Mazda CX-7- Video

Install-thule-podium-loadbars-2012-mazda-cx7 Today on our 2002 Mazda-cx7, well be test fitting the Thule Roof Rack. We will be using the 50 inch square bars and the podium feet. To begin todays test fit we need to start by removing the covers on the roof drip moldings. Youll find there are four covers so well go ahead and remove those now. With the excess covers removed we are now ready to test fit the roof rack assembly; we will now set the set screw into the holes predrilled from the factory. With the studs finger tight, you will use the included Allen ranch to tighten them down. more

12/20/2011 8:12:58 AM

Thule AeroBlade Podium Roof Rack Installation - 2012 Mazda CX-7- Video

Install-thule-podium-aeroblade-2012-mazda-cx7 Today on this 2012 Mazda cx7 were going to be test fitting a Thule Roof Rack system using the 47 inch aeroblade bars, the podium rapid feet as well as the fit kit designed for this car. The first thing we need to do is pop the covers off the fixed point. The cx7 has four fixed points along the roof of the car that were going to anchor. To remove the system to covers simply push them back according to the arrows marked on the cover. Once weve done that were going to take our threaded rods, fit then into the fix points of the roof rack and tighten them down. With the threaded racks tightened down in each of the fix points were going to take our four sleeves and slide them over the post. more

12/19/2011 11:02:05 AM